Arredo System

Refrigerated

Cold Rooms

Traditional systems

Racks


ARREDO SYSTEM has developed over the years, a department technician in recovery and refurbishment of refrigeration equipment from supermarkets and hypermarkets. Such equipment ricondzionate, installed years ago in Italy and all 'foreign, they are still functioning properly.

The equipment, from reconditionnement are produced originally from notes Italian factories ensuring compliance with the storage temperature of perishable products and high standards of quality in the production process. The refrigerated equipment come from the renewal of supermarkets and hypermarkets, which changes the effect of existing lay-out, have preferred to install new lines of refrigerated cabinets and racks with adequate powers. Often it falls under the benches installed a few years ago and refrigeration units still in perfect condition. Equipment are not in fact dead. As you can easily understand the phenomenon of concetrazione and the change of teaching in recent years have led to renewed advance and certainly not motivated by old equipment.


Repackaging refrigerated

The reconditioning process starts with the disassembly of main components such as racks, shelves, bottom grid, the coprievaporatore, the evaporator, the fan holder, backs that form the air ducts. It tests the solidity of the structure and 'thermal insulation banco.Viene washed inside and outside with non-corrosive cleaning solutions, with spears in pressure, with the aim of eliminating all waste and bring it to a high standard igienico.Viene Disassembly of the valve thermostatic wash the cooling system with appropriate mixtures to remove any residual oils and lubricants. The control of all components and their possible replacement of the first stage of controlled operazioni.Vengono plates making up the structure and parts support of perishable products and in case of need are remodeled or rebuilt.


Racks

The compressors are controlled individually, Dismantle and check the pistons and the compression chamber. Electrical parameters are verified at no load and load the electric motor. They are clean inside and put new oil. Each component is replaced with its worn parts originali.Al the cooling condenser is washed with special mixtures to remove residual impurities. The verification of the electric motor and fan blades or helical spin out of control.


Final Test

A sample is periodically choosing a counter refrigerator and check with the thermodynamic performance of the original data by test at room temperature and humidity controlled, the compressor is calibrated and temperature sensing continuously for 24 hours.


Benefits

Investment reduced by 50%. The performance will be the same without any increase in power consumption energetici.Perfetta installed or storage of products in accordance with EN 441.Disponibilità of all spare parts for the entire period of funzionamento.Pronta delivery, without unnecessary perished in time, from a stock-stocked fridges and central banks of various powers and the capacitors.